● Low Torque Floating Seat: The valve uses a floating seat with O-ring seals for easy and efficient bidirectional sealing. It requires only half the usual operating torque, making it easy to open and close.
● Dual PTFE and Metal Seals: The seat incorporates a PTFE sealing ring for dual protection with both PTFE-to-metal and metal-to-metal sealing capabilities. It also helps clean debris from the gate.
● Grease Injection for Sealing: Equipped with a grease valve, the valve allows grease to be injected directly to the seal, achieving zero leakage.
● Flow Guiding Hole Design: The gate includes guiding holes to protect the sealing surface from media erosion, ensuring a perfect seal at all times.
● Low Flow Resistance and Pigging Capability: With a straight and smooth channel when fully open, the valve offers minimal flow resistance and supports pipeline pigging.
● Easy Maintenance and Low Leakage: Features a self-sealing packing structure that requires minimal adjustment and has an auxiliary sealing grease injection for guaranteed zero leakage.
● Self-Relieving Seat: Automatically relieves high pressure inside the valve when closed for added safety.
● All-Weather Actuator: Comes with fully enclosed, weather-resistant actuators suitable for all conditions.
● Position Indicator: Includes an indicator to show whether the valve is open or closed.
● Reliable Seat Design: Features a dual soft seal structure and multiple sealing rings for enhanced reliability.
Material: Carbon Steel, Stainless Steel, Alloy Steel
Nominal Size: NPS 6"~60"、DN 50~1500
Pressure Rate: Class 150~2500、PN 100~420
Temperature Range: -60°C~+538°C
Operator: Manual, Electric, etc...
Application range: tap water, sewage, construction, petroleum, chemical industry, food.
◎ Design Standard: ASME B16.34, GB/T 12234
◎ Pressure Temperature Rate: ASME B16.34, GB/T 12224
◎ Face to Face: ASME B16.5, ASME B16.47, GB/T 9113, JB/T 79, HG/T 20592, EN 1092,
GOST 33259
◎ Flange Standard: ASME B16.5, GB/T 9113, JB/T 79, HG/T 20592, EN1092, GOST 33259
◎ Butt Weld Standard: ASME B16.25, GB/T 12224
◎ Pressure Test: API 598, API 6D, GB/T 13927, JB/T 9092, GOST 9544
The valve disc of the Cryogenic Swing Check Valve adopts a cantilevered swing structure, combined with precisely machined valve seat sealing surfaces, to achieve rapid response and reliable sealing, effectively preventing the reverse flow of the medium. The overall design of the valve complies with international standards such as BS 6364 and ISO 28921, and is suitable for low-temperature conditions in air separation plants, liquefied natural gas storage and transportation, and the chemical industry.
The Comodity Cast Steel Gate Valve is mainly composed of valve body, valve cover, valve wedge, valve seat and valve stem. The two sealing surfaces are wedge-shaped gate valves. The purpose of the wedge is to improve the auxiliary seal load, to achieve both high medium pressure sealing and low medium pressure sealing. The valve body of the wedge valve is provided with a guide mechanism, which can prevent the gate from rotating when the gate is turned on or closed, ensuring that the seal of the gate on the valve seat is accurate accordingly. At the same time, the wedge valve does not rub with the valve seat before turning off, thereby reducing the wear of the cover and effectively extending the service life of the valve.
This product is a new type top entry combination ball valve,the seat can be installed and move around the body. Through the thread, the outer margin of the seat connected to the retainer ring. There is spring on the support cover, which installed on the valve body, and the retainer ring can compress spring.