● Space And Weight Saving
● Cost Saving (Product & Installation)
● Minimized Leak Paths
● Increased Line Structural Integrity
● ESDV+MOV Or ESDV+XV Configurations
● Increased Reliability Of The System
● Anti Blow Out/Low Emission Stems
● Fire Safe & Anti-Static Design
● Independent Ball And Stem
● Self Aligning Trims
● Self Relieving/ Double Piston Effect
● Floating Seats
● Soft Or Metal Seated
Material: Carbon Steel, Stainless Steel, Alloy Steel
Nominal Size: NPS 2"~60", DN 50~1500
Pressure Rate: Class 150~2500, PN 10~420
Temperature Range: -60°C~+250°C
Operator: Manual, electric, pneumatic, etc.
Application range: Suitable for switching the flow direction of the medium in pipeline systems such as water supply, petrochemical, metallurgy, mining, textile, energy, paper, food, steel, etc. Also, for shunting or mixing fluids.
Designed specifically for deep-cold media such as LNG and liquid oxygen, this valve features an austenitic stainless steel body that undergoes special deep-cold treatment to ensure reliable sealing and operational performance under extreme conditions of -196℃. The valve stem adopts an extended neck design and is equipped with a vacuum insulation structure, effectively blocking the transmission of cold energy. The valve can be equipped with either a flat seal or a conical seal structure, allowing for selection based on different pressure ratings, and is suitable for precise flow control in liquefied natural gas storage and transportation, air separation equipment, and low-temperature chemical systems.
RAYS Through Conduit (T.C.) Slab Gate Valves are manufactured with a full bore port, rising stem OS&Y and with floating seats and gate, pressure energized, for a bubble tight shut off upstream and downstream under both low and high differential pressure. Double block and bleed capability and automatic relief of excess body pressure are a standard feature of this seat design. The smooth, continuous bore minimizes turbulence within the valve and when in the open position it produces a pressure drop equivalent to a portion of pipe of the same length and diameter. The seat faces are outside the flow stream and therefore protected from the erosive action of the flow. Pigs and scrapers can be run through the valve without damage.
This product is a new type top entry combination ball valve,the seat can be installed and move around the body. Through the thread, the outer margin of the seat connected to the retainer ring. There is spring on the support cover, which installed on the valve body, and the retainer ring can compress spring.